View 216-7388-55-1902_4638086.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

8821a?crypto?6/12 atmel at88ck9000 kit atmel at88ck9000 atmel secure personalization kit for cryptoauthentication user guide
2 atmel at88ck9000 secure personalization kit for cryptoauthentication [user guide] 8821a?crypto?6/12 features ? single push-button triggers parallel programming ? supports programming of up to 10 devices at a time for soic package ? supports programming of up to 5 devices at a time for tssop, udfn, or tssop ? provides the following feedback: ? serial number ? programming count ? programming limitation count ? firmware version ? device and protocol ? verification cycle ? status lights for pass/fail per device ? visual feedback while programming (push button light is on) ? embedded power controller ? provides power to duts only when programming ? load/unload safe ? detects when devices are positioned backwards and cuts power to protect the board ? standard micro-usb used for power and configuration contents ? atmel ? at88ck9000 board ? universal power supply adaptor ? 0.5m usb cable introduction the atmel at88ck9000 secure personalization kit has been developed to securely personalize the atmel cryptoauthentication ? atsha204 device. depending on the ordering code, the kit can securely personalize 8-lead soic, 8-lead tssop, 8-pad udfn, and 3-lead sot23 package types. the 8-lead soic kit has sockets that can accommodate two devices per socket making it capable of personalizing up to 10 devices at a time. safety and security has been added to ensure secure high-reliability programming. the at88ck9000 kit interfaces to the atmel crypto evaluation studio (aces) software suite to provide communication to a pc via a usb interface. this allows trusted users to program the board outside of the manufacturing environment. once programmed, the board becomes a standalone board. as a standalone board, it only requires power, after which, will allow the programming of the atsha204 devices. in addition, this board has an internal counter to keep track of how many devices were programmed, both in total, as well as by session.
3 atmel at88ck9000 secure personalization kit for cryptoauthentication [user guide] 8821a?crypto?6/12 table of contents becoming familiar with atmel at88ck9000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 install atmel crypto evaluation studio (aces) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 configuring the atmel at88ck9000 board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 powering up the board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 putting the board in the program mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 ordering code information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 firmware upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 maintenance of the atmel at88ck9000 kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 troubleshooting the atmel at88ck9000 kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4 atmel at88ck9000 secure personalization kit for cryptoauthentication [user guide] 8821a?crypto?6/12 becoming familiar with atmel at88ck9000 the at88ck9000 has been designed to make secure personalization of the cryptoauthentication atsha204 devices as easy as possible. usb power display program button pass/fail indicators
5 atmel at88ck9000 secure personalization kit for cryptoauthentication [user guide] 8821a?crypto?6/12 configuration mode button reset button fw erase pads
6 atmel at88ck9000 secure personalization kit for cryptoauthentication [user guide] 8821a?crypto?6/12 install atmel crypto evaluation studio (aces) to download atmel crypto evaluation studio (aces), visit: http://www.atmel.com/tools/atmelcryptoevaluationstudio_aces_.aspx . note: the at88ck9000 kit is compatible with version 3.2.0 or later. 1. launch the installer by executing the downloaded file (e.g. aces_setup.exe). 2. follow the installation instructions in the setup wizard. 3. once installed, three aces icons should be located on your desktop. these icons include: the aces programmer icon will launch the aces programmer. see ?configuring the atmel at88ck9000 board? in the following section for at88ck9000 board configuration steps.
7 atmel at88ck9000 secure personalization kit for cryptoauthentication [user guide] 8821a?crypto?6/12 configuring the atmel at88ck9000 board now that aces has been installed, begin configuring the atsha204 to work in your system. the recommended method is to define and test your device configuration using the aces configuration environment (ce). aces ce can create a personalization file that is compatible with the at88ck9000 kit. save the personalization file in aces ce: 1. launch aces ce: ? from your desktop, select the aces ce icon or ? from the start menu, select start > atmel crypto solutions > aces > aces ce . 2. configure the working device to the desired configuration. 3. from aces ce menu bar, select file > save personalization file.. . 4. the file save as dialog box will be displayed. 5. name the personalization file and select save .
8 atmel at88ck9000 secure personalization kit for cryptoauthentication [user guide] 8821a?crypto?6/12 powering up the board the at88ck9000 board can be powered via the multi-voltage power supply which is supplied with the kit or via a usb port on a pc. once powered, the green led will illuminate next to the usb connector, and the green leds will illuminate below each socket. usb power leds are illuminated power led is illuminated
9 atmel at88ck9000 secure personalization kit for cryptoauthentication [user guide] 8821a?crypto?6/12 putting the board in the program mode 1. plug in the secure personalization board while holding the boot select button. holding the boot select button located on the back of the board while powering the board will put the board in the programming mode. the below image shows what should be shown on the display. 2. download the file contents to the programmer board. ? select the aces programmer desktop icon to launch the aces programmer. ? the personalize programmer board dialog box will then be presented. notes: 1. the board is attached. 2. the file is not selected. ? select the button and select a personalization file. (select the file that you have created using aces ce)
10 atmel at88ck9000 secure personalization kit for cryptoauthentication [user guide] 8821a?crypto?6/12 3. to load the contents of the file in preparation to download to the programmer board, select preview file . the programmer user interface should resemble the below dialog box. 4. select download . ? if download is successful, the download confirmation dialog box will be displayed. ? if download is not successful, the unsuccessful download dialog box will be displayed.
11 atmel at88ck9000 secure personalization kit for cryptoauthentication [user guide] 8821a?crypto?6/12 5. select verify . ? if successful, the verified confirmation dialog box will be displayed. ? if verify is not successful, the unsuccessful verified dialog box will be displayed. 6. once the board has been successfully programmed, either: ? unplug the usb cable from the board or ? press the reset button located on the back of the board. the at88ck9000 display should display the communication panel screen as shown below. 7. congratulations, your atmel at88ck9000 board is up and running. device = device type and protocol count?t = lifetime count of programmed devices count?s = session count of programmed devices limit = configurable limit per session s/n = unique serial number fw = firmware revision status = board status
12 atmel at88ck9000 secure personalization kit for cryptoauthentication [user guide] 8821a?crypto?6/12 firmware upgrade to be determined. maintenance of the atmel at88ck9000 kit the sockets used in the at88ck9000 kit are rated for 50,000 insertions per socket. care must be taken to not bend or deform the leads of the socket. if the sockets become damaged or worn, the following part numbers and suppliers should be used for replacement purchases. the sockets will need to be unsoldered and then resoldered onto the board. troubleshooting the atmel at88ck9000 kit issue: no power resolution: verify that the usb cable is plugged correctly to the board, and is plugged into an approved power source. ? if the cable is plugged into the correct power source, try unplugging the cable and then replug the cable into the at88ck9000 board. issue: one or more sockets (sites) always failing. resolution: visually inspect the socket for bent leads. ? if the leads are straight, clean the contacts on the socket. ? if the site is still failing, the socket may be worn and should be replaced. issue: board fails to enumerate to the pc for configuration mode resolution: be sure the board is in the configuration mode and is not in the programming mode. ? try unplugging and then replug the usb cable into the board while pushing the boot select mode button on the back of the board. package type part number supplier 8-lead soic 216-7388-55-1902 digikey 3m5078-nd 8-lead tssop fp-8(24)-065-01a enplas 3-lead sot23-3 499-p36-10 wellscti 8-pad udfn 08qn50l43020 plastronics
13 atmel at88ck9000 secure personalization kit for cryptoauthentication [user guide] 8821a?crypto?6/12 ordering code information evaluation board/kit important notice revision history function ordering code package type at88ck9000-8sh 8s1 8-lead jedec soic at88ck9000-8th 8x 8-lead tssop at88ck9000- tsu 3ts1 3-lead sot23-3 at88ck9000-8ma 8ma2 8-pad udfn this evaluation board/kit is intended for engineering, development, demonstration or evaluation purpose only. it is not a finished product and may not (yet) comply with some or any technical or legal requirements that are applicable to finished products, including, without limitations, directives regarding electromagnetic compatibility, recycling (weee), fcc, ce or ul (except as may be otherwise noted on the board/kit). atmel ? supplied this board/kit ?as is,? without any warranties, with all faults, at the buyer's and further users' sole risk. the user assumes all responsibly and liability for proper and safe handling of goods. further, the user indemnifies atmel from claims arising from the handling or use of goods. due to open construction of the product, it is the user's responsibility to take any and all appropriate precautions with regard to electrostatic discharge and any other technical or legal concerns. except to the extent of indemnity set forth above, neither user nor atmel shall be liable to each other for any indirect, special, incidental, or consequential damages. no license is granted under any patent right or other intellectual property right of atmel covering or relating to any machine, process, or combination in which such atmel product or services might be or are used. mailing address: atmel corporation 1600 technology drive san jose, ca 95110 usa doc. rev. date comments 8821a 06/2012 initial document release
atmel corporation 1600 technology drive san jose, ca 95110 usa tel: (+1) (408) 441-0311 fax: (+1) (408) 487-2600 www.atmel.com atmel asia limited unit 01-5 & 16, 19f bea tower, millennium city 5 418 kwun tong roa kwun tong, kowloon hong kong tel: (+852) 2245-6100 fax: (+852) 2722-1369 atmel munich gmbh business campus parkring 4 d-85748 garching b. munich germany tel: (+49) 89-31970-0 fax: (+49) 89-3194621 atmel japan g.k. 16f shin-osaki kangyo bldg 1-6-4 osaki, shinagawa-ku tokyo 141-0032 japan tel: (+81) (3) 6417-0300 fax: (+81) (3) 6417-0370 ? 2012 atmel corporation. all rights reserved. / rev.: 8821a?crypto?6/12 disclaimer: the information in this document is provided in connection with atmel products. no license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of atmel products. except as set forth in the atmel terms and conditions of sales locat ed on the atmel website, atmel assumes no liability whatsoever and disclaims any express, implied or statutory warranty relating to its products including, but not li mited to, the implied warranty of merchantability, fitness for a particular purpose, or non-infringement. in no event shall atmel be liable for any d irect, indirect, consequential, punitive, special or incidental damages (including, without limitation, damages for loss and profits, business i nterruption, or loss of information) arising out of the use or inability to use this document, even if atmel has been advised of the possibility of suc h damages. atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the ri ght to make changes to specifications and products descriptions at any time without notice. atmel does not make any commitment to update the information contained herein. unless specifically provided oth erwise, atmel products are not suitable for, and shall not be used in, automotive applications. atmel products are not intended, authorized, or warranted for use as components in applications intend ed to support or sustain life. atmel ? , atmel logo and combinations thereof, enabling unlimited possibilities ? , cryptoauthentication ? , and others are registered trademarks or trademarks of atmel corporation or its subsidiaries. other terms and product names may be trademarks of others.

▲Up To Search▲

Price & Availability of 216-7388-55-1902

	To Download 216-7388-55-1902 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .